Label printing with continous paper

I'm trying to build a label report for a zebra zt230 using continous paper.

the label print fine but the paper height is always wrong. the only solution i found was to export the report to PDF and print it with adobe.

i would like to print directly from Fast report.

is there anything i need to change to send the correct height of the label to the printer.


thanks a lot!

Comments

  • mierlpmierlp Netherlands

    I print wristband and labels directly from FastReport report (windows application) without any problem on TSC printers

    First check if you're labels have a blackmark of gap so the printer knows where to stop/start printing.

    Often you can indicate in the printer settings whether you use a blackmark or gap and even whether

    the paper must be pulled back a certain number of centimeters before printing.

    Generally, creating a report based on the label size is not enough

  • mierlpmierlp Netherlands

    I print wristband and labels directly from FastReport report without any problem on TSC printers

    First check if you're labels have a blackmark of gap so the printer knows where to stop/start printing.

    Often you can indicate in the printer settings whether you use a blackmark or gap and even whether

    the paper must be pulled back a certain number of centimeters before printing.

    Generally, creating a report based on the label size is not enough

  • Same like you I faced the issue to get the direct report by using the printer. Really upset about that problem, but I always try to find out the solution. But after few months I found the Wired Thermal Label Printer ITPP941 that's solve my problem. Now, I used this printer device to print the fast report on regularly. Similar to a delivery name and for those organizations who like to print without a strip, similar to the medical services industry. Instances of Direct Warm Marks incorporate receipts, transporting marks, informal IDs, standardized identifications and passes.




  • Hello!

    In the report page settings (PageSetup / ReportPage), set the exact PaperWidth and PaperHeight (in mm), set any unnecessary margins (LeftMargin, TopMargin, BottomMargin) to zero and, if the label length is variable, set UnlimitedHeight = true.

    In the Zebra driver settings (Printing Preferences -> Stock / Paper Format), select Continuous (or the exact label size) and calibrate the gap/black mark sensor (Sensor Type: Mark / Web), and also check report.PrintSettings.Printer and PrintSettings.PrintOnSheetPaperSize.

    For continuous label printing directly on the Zebra printer, you can alternatively generate and send ZPL commands or use `PrintSettings.PageNumbers` with a fixed paper size in the driver, whilst disabling scaling.

This discussion has been closed.