I using the fastreport to barcode and I've made the
settings default. the printer old is broken then I replace a new printer to print.
I printed the results after all in the middle.need advice
As you have given no useful information, i can only guess that you may have had to set up some thing for the old printer that you have not done with the new printer
eg. custom page size maybe
ok this historynya. I got my printer and then print a barcode and then I print no problem. after that my printer no problem section so it can not print and then buy a new printer with the same type but different series. then I print my barcode with the same settings and then I see the results come out in the middle.
ok this historynya. I got my printer and then print a barcode and then I print no problem. after that my printer no problem section so it can not print and then buy a new printer with the same type but different series. then I print my barcode with the same settings and then I see the results come out in the middle.
Did you make the new printer the default printer for windows? Do that and then test.
If no change I think you might have to 'redesign' your report.
I suspect that the differences are due to some of the printer setting having been stored as part of the report design. Loading/running the report uses the old setting with the new printer.
This mean as a minimum you need open the report in design mode and then save it, either to file, or if embeded with the project.
This is pure guesswork from my side because as gordk says, you have given virtually no information for us to work with.
Sorry I failed to give clear information. I used printer brand EXXXX type inject. then defective printer and then I buy laserjet printer brand HX. reality I try barcodes print not same printed by the brand EXXXX, then a few days later I again borrow HX brand that another of his laserjet series that I bought, but the result is he same as the brand EXXXX barcode printed on the left. I want to ask why the barcode can be printed in the middle, I need advice fast report what can we make manual settings so for this format for setting top, bottom, left, right and then disimpan.jadi can be tailored to the needs of users such as page setup at Ms.Word
Sorry I failed to give clear information. I used printer brand EXXXX type inject. then defective printer and then I buy laserjet printer brand HX. reality I try barcodes print not same printed by the brand EXXXX, then a few days later I again borrow HX brand that another of his laserjet series that I bought, but the result is he same as the brand EXXXX barcode printed on the left. I want to ask why the barcode can be printed in the middle, I need advice fast report what can we make manual settings so for this format for setting top, bottom, left, right and then disimpan.jadi can be tailored to the needs of users such as page setup at Ms.Word
My thoughts:
- Make sure that report is loaded from file
- Make sure that printer is assigned to the report by name at run-time. Do not rely on it being the default printer.
Comments
settings default. the printer old is broken then I replace a new printer to print.
I printed the results after all in the middle.need advice
eg. custom page size maybe
If no change I think you might have to 'redesign' your report.
I suspect that the differences are due to some of the printer setting having been stored as part of the report design. Loading/running the report uses the old setting with the new printer.
This mean as a minimum you need open the report in design mode and then save it, either to file, or if embeded with the project.
This is pure guesswork from my side because as gordk says, you have given virtually no information for us to work with.
- Make sure that report is loaded from file
- Make sure that printer is assigned to the report by name at run-time. Do not rely on it being the default printer.