Help Fast Report 4

edited 3:31AM in FastReport 4.0
i use fast report 4,but I am confused because I was fastreport always change when changing printer,can help me please

Comments

  • gordkgordk St.Catherines On. Canada.
    edited 3:31AM
    i have no idea what you are asking please explain in more detail.
  • edited 3:31AM
    I using the fastreport to barcode and I've made the
    settings default. the printer old is broken then I replace a new printer to print.
    I printed the results after all in the middle.need advice
  • gordkgordk St.Catherines On. Canada.
    edited 3:31AM
    As you have given no useful information, i can only guess that you may have had to set up some thing for the old printer that you have not done with the new printer
    eg. custom page size maybe
  • edited 3:31AM
    ok this historynya. I got my printer and then print a barcode and then I print no problem. after that my printer no problem section so it can not print and then buy a new printer with the same type but different series. then I print my barcode with the same settings and then I see the results come out in the middle.
  • gordkgordk St.Catherines On. Canada.
    edited 3:31AM
    you have still not given any useful information for any one to be able to help you.
  • edited December 2010
    jery wrote: »
    ok this historynya. I got my printer and then print a barcode and then I print no problem. after that my printer no problem section so it can not print and then buy a new printer with the same type but different series. then I print my barcode with the same settings and then I see the results come out in the middle.
    Did you make the new printer the default printer for windows? Do that and then test.
    If no change I think you might have to 'redesign' your report.
    I suspect that the differences are due to some of the printer setting having been stored as part of the report design. Loading/running the report uses the old setting with the new printer.

    This mean as a minimum you need open the report in design mode and then save it, either to file, or if embeded with the project.

    This is pure guesswork from my side because as gordk says, you have given virtually no information for us to work with.
  • edited 3:31AM
    Sorry I failed to give clear information. I used printer brand EXXXX type inject. then defective printer and then I buy laserjet printer brand HX. reality I try barcodes print not same printed by the brand EXXXX, then a few days later I again borrow HX brand that another of his laserjet series that I bought, but the result is he same as the brand EXXXX barcode printed on the left. I want to ask why the barcode can be printed in the middle, I need advice fast report what can we make manual settings so for this format for setting top, bottom, left, right and then disimpan.jadi can be tailored to the needs of users such as page setup at Ms.Word
  • edited 3:31AM
    jery wrote: »
    Sorry I failed to give clear information. I used printer brand EXXXX type inject. then defective printer and then I buy laserjet printer brand HX. reality I try barcodes print not same printed by the brand EXXXX, then a few days later I again borrow HX brand that another of his laserjet series that I bought, but the result is he same as the brand EXXXX barcode printed on the left. I want to ask why the barcode can be printed in the middle, I need advice fast report what can we make manual settings so for this format for setting top, bottom, left, right and then disimpan.jadi can be tailored to the needs of users such as page setup at Ms.Word
    My thoughts:
    - Make sure that report is loaded from file
    - Make sure that printer is assigned to the report by name at run-time. Do not rely on it being the default printer.
  • edited 3:31AM
    thank you for your help,thank you smile.gif

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.