Text don't center vertically

I have a memo on the report in which I want to center the text vertically. This works perfect on my HP 4000N Laserjet. But the problem is, that it doesn't work on an Oki 10i laserjet.

It's very strange that it works on 1 printer but not with the other printer.

Does anybody know, how I can solve this problem?

Comments

  • gordkgordk St.Catherines On. Canada.
    edited 10:12PM
    hi tokkie
    the only thing i can think of is to check if the oki is using the latest drivers available. Can you try it on other printers? if you can't
    save as an .frp zip it up and emailit to me, ill try it on canon inkjets
    regards ;)
  • gordkgordk St.Catherines On. Canada.
    edited 10:12PM
    Hi Tokie
    i can't see any thing particulary worng in the frf you posted and of course i cant print from it as i don't have your data.
    run a preview and save as a .frp file and post that
    ill see how it prints on canon ij
    regards ;)
  • gordkgordk St.Catherines On. Canada.
    edited 10:12PM
    hi Tokie i can't seem to find a problem which memos are supposed to be centered verticaly? in the frp iam seeing a lot of empty fields. i am assuming there is no data
    Let me know a specific output page # field name where you get misalignment.
    regards ;)
  • edited 10:12PM
    GordK,

    It's right that a lot of memo's are empty.

    But the problem is with the memo's with the text:

    WEEK 9
    WEEK 10
    ect....

    and

    BV
    B
    R/D
    LEV

    and

    MA
    DI
    WO
    DO
    VR
    ZA
  • gordkgordk St.Catherines On. Canada.
    edited 10:12PM
    Hi tokie
    It prints fine on canon inkjets under w98 wxppro.
    is it possible in the setup using the okidata that font substitution is ocurring?
    regards ;)
  • edited 10:12PM
    gordk wrote:
    Hi tokie
    It prints fine on canon inkjets under w98 wxppro.
    is it possible in the setup using the okidata that font substitution is ocurring?
    regards ;)
    What do you mean?

    Do you mean that the font is not available on the computer and that windows choose another font?
  • gordkgordk St.Catherines On. Canada.
    edited 10:12PM
    Hi Tokie
    that is one possibility, the other could be the printer not being allowed to download fonts as needed, usually dm's,but it can be with any printer that has a programmable interface, either through driver or touchpanel on the printer.
    regards ;)
  • gordkgordk St.Catherines On. Canada.
    edited 10:12PM
    Hi Tokie
    here is some info from okidata
    10i discontinued 12/31/98 replaced by 12i discontinued 11/30/2000 replaced by
    14i discontinued 10/15/2003 replaced b4300.
    regards ;)
  • edited 10:12PM
    gordk wrote:
    Hi Tokie
    here is some info from okidata
    10i discontinued 12/31/98 replaced by 12i discontinued 11/30/2000 replaced by
    14i discontinued 10/15/2003 replaced b4300.
    regards ;)
    Yes it is an old printer. But first I was printing without a report generator and I have never had any problems.

    But do you mean that I must try the driver B4300 with the oki 10i?
  • gordkgordk St.Catherines On. Canada.
    edited 10:12PM
    Hi tokie
    "Yes it is an old printer. But first I was printing without a report generator and I have never had any problems." This should be a clue, it was probably using standard block fonts and not scalable true type fonts and being as old as it is there may not be newer drivers for it, particularly if running under xp or 2k.
    Check your okidata site and you may find something that will work.
    sorry i can't help you out with this one.
    regards ;)
  • edited 10:12PM
    Hi Gordk,

    In the old program I use:
      Printer.Canvas.Font.Name := 'Arial';
    

    So this is a TrueType Font.

    Or am I thinking wrong?

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.