Same Totals??

Comments

• PixelPointer Vaughan, Ontario

  February 2006 edited 4:16AM

  In my search, I found, using the showMessage function, that in the ReportSummary1 obp event, the sum of <price> is correct, but the assingnment to extSGRevenues is incorrect. For some reason, extSGRevenues is being set to the total of the first grouping, and not the report total, as it should be.
• PixelPointer Vaughan, Ontario

  February 2006 edited 4:16AM

  Ok, I really don't get it, and I am really getting frustrated with this reporting tool! I was using the built in variables list to add variables, but I thought that maybe that was my issue, so I created new variables of type double, and then initialized them to zero during the FFReport ors event. Again, using a message box, I can see that my values for the summation are correct, however the variables are not being set properly. Immediately after being set, they show a value of 0, once the report is complete, they contain a value, but it is identical, even though they are in different bands.
  
  This is a portion of my code, if anyone has the time to look @ it.

  var
  NewRCRevenues: Double;
  NewSGRevenues: Double;
  
  procedure memPercentRelatedOnBeforePrint(Sender: TfrxComponent);
  begin
      if Engine.FinalPass then
         begin
                 if Get(<NewRCRevenues>) > 0 then
                 begin
                         memPercentRelated.Text := FormatFloat('0.000',(<Price> / Get(<NewRCRevenues>) * 100));
                 end
                 else
                 begin
                         memPercentRelated.Text := '0.000';
                 end;
         end;
  end;
  
  procedure memPercentTotalOnBeforePrint(Sender: TfrxComponent);
  begin
    if Engine.FinalPass then
         begin
                 if Get(<NewSGRevenues>) > 0 then
                 begin
                         memPercentTotal.Text := FormatFloat('0.000',(<ProfitDollars> / Get(<NewSGRevenues>) * 100));
                 end
                 else
                 begin
                         memPercentTotal.Text := '0.000';
                 end;
         end;
  end;
  
  procedure ReportSummary1OnBeforePrint(Sender: TfrxComponent);
  begin
         if not Engine.FinalPass then
         begin
                 { Aggregate the prices for the entire report }
                 Set(<NewSGRevenues>, Sum(<Price>, MasterData1,1));
                 showMessage('SG-Sum<Price> ' + FloatToStr( Sum(<Price>, MasterData1,1)));
                 showMessage('NewSGRevenues ' + FloatToStr(<NewSGRevenues>));
         end;
  end;
  
  procedure gfSummaryGroupOnBeforePrint(Sender: TfrxComponent);
  begin
         if not Engine.FinalPass then
         begin
                 { Aggregate the prices for summary group }
                 Set(<NewRCRevenues>, Sum(<Price>, MasterData1));
                 showMessage('RC-Sum<Price> ' + FloatToStr( Sum(<Price>, MasterData1,1)));
                 showMessage('NewRCRevenues ' + FloatToStr(<NewRCRevenues>));
         end;
  end;
  
  procedure FFReportOnStartReport(Sender: TfrxComponent);
  begin
    NewRCRevenues:=0;
    NewSGRevenues:=0;
  
  end;
  
  begin
  end.
  

  
  I have about 10 reports to write, that are similar to this one, but this one has taken me over a week!!! So, if anyone has a solution, I will certainly give it a try, and will be very appreciative.
  
  Thank you.
• GRFrones

  February 2006 edited 4:16AM

  Hi, I think there is a demo on FastReport intallation path for something like that.
  
  Actually, it don't use Script, but a memo expression.
  
  Have you tried it?
  
  Btw: FastReport is an excelent Report tool if you never try to use its Script!
• PixelPointer Vaughan, Ontario

  February 2006 edited 4:16AM

  I had previously downloaded the Fast Reports demo, and got a lot of this code from it, and then simply adjusted it to fit my needs. For one sum, it seems to work ok, but in total, I need 4 sums. From what I have seen so far, the variables don't seem to be getting set properly, as the numbers are accurate at each point when the variables are set. I am more frustrated now, than when I first used Win 3.1!!!
• gordk St.Catherines On. Canada.

  February 2006 edited 4:16AM

  It is even more excellent when using code script.
  You are probably setting values in the wrong place or event.
  Frustration usually comes from hacking code from demos and trying to adapt without understanding why and where it was written.
  Been there done that.
  
  variables declared at the top of the code page are global to the report
  can be used in any object event and displayed in a memo by enclosing in [ ]
  you can initialize them in the empty begin end block at the bottom of the code page no need to add a procedure to initialize them, this is the first piece of code to run. one must pay attention to where they may be reinitialized
  they can be retreived/modified with out using the get set methods, which are used with categorized variables in the variable list.
  the best bet is to design layout first then write the code to suit
  a lot of things can be accomplished just using expressions and functions in the memos themselves, also setting the displayformat prop of the memo and using an intermediate var for display purposes can save writing a lot of code converting to formated strings and changing text of memos.
  one caveat when using grouping it will not perform correctly with unidirectional datasets like DBX.
  
  
• PixelPointer Vaughan, Ontario

  February 2006 edited February 2006

  Thank you, gordk, I appreciate you taking the time to respond to my post. Yes, a lot of my frustration is coming from not knowing what my script can and cannot do. I have programmed in VB, C#, and C for many years, so I at least have some programming knowledge. I only bastardize the code because I would rather take what is already written, than re-write from scratch. The code makes sense to me, however, obviuosly there is something that I think I have my head around, that I really don't. :-) Now, THERE is my frustration. The company for whom I work, has already purchased this tool, and has integrated it into our software package, so I don't have much of a choice, but to make this work. There are only 2 things that I am missing, that would complete my report writing.
  
  (1) being able to do calculations based on summed columns from various levels of grouping
  (2) an automated export to csv
  
  Once I conqueur those two issues, I am off to the races. :-) I will continue to plug away, and hopefully I will get these variable settings working.
• gordk St.Catherines On. Canada.

  February 2006 edited 4:16AM

  if your programmer included the export components in the app
  when you preview the report you should be able to export to the format of your choice.
  read the usermanual chapter on working with aggregates around pg 61 IIRC
  BTW what version of fr and delphi are being used?
• PixelPointer Vaughan, Ontario

  February 2006 edited 4:16AM

  Thank you for your response, gordk. I have been away visiting clients for a few days, and did not check my posts.
  
  For Delphi, it is V5, for FR it is 3.20.
  
  I have read the aggregates functions in the manual, and I am pretty sure that I have a good idea of how they work, however, I still can't get this thing to work. At first, the task seemed pretty simple, add up 3 columns, take the sum at the bottom, and divide each value in the list by the sum to get the percentage of total for each value. I was able to get one column to work, but thats it so far.
  
  As for exporting, I can export manually from the reports, but I am tring to put together a script that will allow the customer to use our scheduler to schedule the reports, and have them exported automatically. :-(
  
  Since my last bad attitude post, I have built quite a number of simple reports in Fast Reports, and I was able to build them quite quickly. Its just these last two issues that have created a dent in my desk the size of my forehead.
• PixelPointer Vaughan, Ontario

  February 2006 edited 4:16AM

  So, if I chose not to use script, is there a way to tell fast reports, in a memo field that I want the value of the current row divided by the sum of the values?
  
  i.e.
  
  Sales | % of Sales

  ---

  $12 | 0.150
  $10 | 0.125
  $34 | 0.425
  $24 | 0.300

  ---

  $80 | 1.000
• gordk St.Catherines On. Canada.

  February 2006 edited 4:16AM

  Hi pixelpointer go to the binaries newsgroup
  ill post a modified version of 45.frf from the main frdemo for you
  the subject will be modified frf for pixelpointer.
• PixelPointer Vaughan, Ontario

  February 2006 edited 4:16AM

  Awseome! Thank you.
• PixelPointer Vaughan, Ontario

  March 2006 edited January 2007

  Got it.