Barcodes and parameters

Comments

• AlexTZ

  July 2009 edited 3:27AM

  Hello,
  
  I will add the SymbologyName property in the next daily build. You will be able to do the following:
  
  barcode.SymbologyName = "PDF417";
  (barcode.Barcode as BarcodePDF417).CompactionMode = CompactionMode.Text;
  
• juakus

  July 2009 edited 3:27AM

  
  Hi:
  Do I have to download FastReport.Net and reinstall it again to get the next daily build?
  I'm asking couse I'm new here and don't know how it works.
  
  Thanks a lot
  Juakus
• AlexTZ

  July 2009 edited July 2009

  Yes, you will need to download it and reinstall. The new version will be available in 4 hours.
• juakus

  July 2009 edited July 2009

  Hi Alex:
  Everything is working fine!
  
  Note for whoever is reading: the name of the symbology is case-sensitive "Code39" works .. "code39" doesn't
  
  Thanks
  Juakus
• AlexTZ

  July 2009 edited 3:27AM

  Hello,
  
  Your code is correct, but you use wrong symbology name (must be Code128 - first letter is capital).
  See full list of supported names in the class reference (BarcodeObject.SymbologyName property).
  
  "2/5 Interleaved"
  "2/5 Industrial"
  "2/5 Matrix"
  "Codabar"
  "Code128"
  "Code39"
  "Code39 Extended"
  "Code93"
  "Code93 Extended"
  "EAN8"
  "EAN13"
  "MSI"
  "PostNet"
  "UPC-A"
  "UPC-E0"
  "UPC-E1"
  "Supplement 2"
  "Supplement 5"
  "PDF417"
  "Datamatrix"
  
  This list is also available if you right-click the barcode object and select the "Barcode Type" item.
• juakus

  July 2009 edited 3:27AM

  Hello Alex:
  I'm back...
  
  I want to be able to keep the barcode centered in the databand and to resize it using parameters.
  To get there I used the "Private Sub _StartReport" event and wrote:
  
  Barcode1.Width=(CType(Report.GetParameterValue("PWidth"), Double)/CType(Report.GetParameterValue("LWidth"), Int16))-0.5
  
  where "pwidth" is the page width and "lwidth" is the label width ..
  so if the lwidth=2 and pwidth=8.5 then the barcode1.width should be (8.5/2)-0.5=3.75" (I already changed the units to "inches" in the report)
  
  It works .. but I'm not getting the right image of the barcode. It's like it changed the units to milimeters or so. To get something close I had to multiply by 20 the result.
  
  
  Thanks
  Juakus
• juakus

  July 2009 edited 3:27AM

  Nevermind!
  Just used "anchor" property and it's working the way I wanted it ... anyway ..there's something else. When I change the width of any barcode the bars-height get reduced and the fonts in the human readable get increased. It's there any way to just zoom the bars but not the fonts?
  
  Thanks
  Juakus
• AlexTZ

  July 2009 edited 3:27AM

  Sorry, there is no way to do this. You can turn off the human-readable text and use additional Text object to display the text (this will not work with some codes like EAN, though).
• Leonardo Herrera

  June 2012 edited 3:27AM

  AlexTZ wrote: »

  Sorry, there is no way to do this. You can turn off the human-readable text and use additional Text object to display the text (this will not work with some codes like EAN, though).

  Hello,
  
  Question: will PDF417 be available for FastReports VCL at any point? I'm very reluctant to buy the PSoft package because I think quality and support is not good enough. I know you guys are working on FR VCL 5, but as an existing customer I would love to have native PDF417 support.
  
  Regards,
  Leonardo Herrera
• AlexTZ

  June 2012 edited 3:27AM

  Hello,
  
  2D barcodes will be available in FR VCL 5.