Relation and Parameters problems!

Comments

• AlexTZ

  July 2009 edited 1:54AM

  Hello,
  
  1) Sorry, I don't understand your question. FastReport.Net can't be compared with FastReport3 - they have different architecture. If you want to print master-detail report, you must have two data bands (master and detail).
  
  2) It's impossible to parse SQL query to get parameters contained in it. Different database engines work with parameters in a different way. For example, MS SQL uses named parameters (@paramname), MS Access parameters don't have name (they denoted using ? mark) and so on.
• jain

  July 2009 edited 1:54AM

  HI~
  
  I want to desgin MASTER-DETAIL report, but i just want to show the summary of DETAIL DATA in MASTER Data band,
  how can i do this??
  
  Example:
  THe MASTERdata is customer and the DETAIL data is goods that customer buy, i want to show total money of detail goods, for every customer.
• AlexTZ

  July 2009 edited 1:54AM

  Hello,
  
  Use the Footer band attached to a detail data. See example in the demo, "General/Master-Detail" report. The DataFooter1 band can be used here to show totals by category.
• jain

  July 2009 edited 1:54AM

  HI!
  
  I had see example in the demo "General/Master-Detail" report,
  but my problme is when i design report which only one data band, the data band is MASTER data, i also have related DETAIL data, these related DETAIL data was queried MASTER data ,
  Cna i design the report which cantain MASTER data and reslut of queried DETAIL data??
  
  
  If i use DataFooter1 band, i must set two data bands(for MASTER,DETAIL) right??
  
• AlexTZ

  July 2009 edited 1:54AM

  If you want totals, you have to use two data bands. You may make the detail data band empty and set its height to 0.
• jain

  July 2009 edited 1:54AM

  HI
  
  i attach my report,
  in ths report, i have three data columns-SUBJECT,BUD,ACT.
  And every data row the reslut of BUD/the reslut of BUD in set a SQL query with SUBJECT data.
  How can i design??
  
  The data od BUD,ACT is related SUBJECT.
  
  Thank you!
• AlexTZ

  July 2009 edited 1:54AM

  May be you need the GROUP report? In this case you will need one databand and a group header/footer bands. Read about it in the "Report creation/Groups and totals" chapter in the user's manual.
• jain

  July 2009 edited July 2009

  HI!
  
  I am sorry, this attach report will show what i want.
  In this report, we can see the MASTER DATA that is "KIND",
  and there are four DETAIL DATA-LAST YEAR/MONEY-1/MONEY-2/MONEY-3,
  these DETAIL DATA is queried by each different MASTER DATA -"KIND".
  So every DATA ROW contain one MASTER DATA and three DETAIL DATA.
  
  I explain each LAST YEAR/MONEY-1/MONEY-2/MONEY-3 are queried SQL statement like CODEBOX
  and parameter KIND will change in MASTER DATA BANDS

  select SUM(MONEY) as MONEY-1
    from TB
   where KIND=@KIND
  

  therefore i can't use GROUP, i want to show ONE DATA ROW contains the MASTER DATA
  and Other related DETAIL DATA-LAST YEAR/MONEY-1/MONEY-2/MONEY-3,
  i don't know how to set these DATIAL SQL statement in MASTER DATA BANDS.
  
  Thank you!
• AlexTZ

  July 2009 edited 1:54AM

  Hello,
  
  Try to change your main SQL so it will contain all master and detail columns - "KIND", "LAST YEAR", "MONEY-1", "MONEY-2", "MONEY-3". In this case you may use one data band with five Text objects on it.
• jain

  July 2009 edited 1:54AM

  HI!
  
  I know how to use one main SQL to desgin the report,
  but can i use different SQL to find the result of LAST YEAR/MONEY-1/MONEY-2/MONEY-3?
  
  All of my reports was designed by Fast Report 3,
  in Fast Report 3, i can use different SQL to find the result with parameters which is come from main DATA BADNS.
  
  Now i want to redesign with Fast Report NET, so i want to know how to implement this method.
  
  Thank you!
  
• AlexTZ

  July 2009 edited July 2009

  Hello,
  
  Please tell me how it was designed in FR3. I suppose you have used the main SQL to connect it to the master data band, and four SQL to show values on the data band?
• jain

  July 2009 edited 1:54AM

  HI~
  
  I used Fast Report 3 with "Masterdata" component,
  and in this "Masterdata", i set SQL-MAIN like:

  select SUBNO from TBACC
  and  YEARS=:YEARS
  

  and in this "Masterdata", i also set other SQL-DETAIL like:

  select ADDMONEY from TBAUDIT
  where YEARS=:YEARS and SUBNO like :SUBNO +'%'
  

  
  In these SQL statement are used ADOQUERY component, and in SQL-DETAIL,
  i set the parameter-:SUBNO is conneting to SQL-MAIN,
  so i can use one Masterdata to design different SQL result.
• AlexTZ

  July 2009 edited 1:54AM

  Could you send me FastReport 3 report file (.fr3)?
  tz@fast-report.com
• jain

  July 2009 edited 1:54AM

  Hi~
  
  i had send mail.
  the subject of mail is "The FastReport 3 report file - come from jain".
  
  Thank you!
• AlexTZ

  July 2009 edited 1:54AM

  Hello,
  
  You need to create a master-master report where different databands are on the same level and don't connected to each other. See user's manual, "Report creation/Master-master report" chapter.
  
• jain

  July 2009 edited July 2009

  HI!
  
  If i use master-master report,
  the data don't have connecting to each others.
  But, i want to design like Master-Detail reports,
  when i create Master data,the Detail data is queried by Master data.
  
  So, in master-master report,how can i design?
  
  i had try to design report,
  and i found if i want to query Detail data with Master data,
  i must design like user's manual, "Report creation/Master-Detial report" chapter.
  In Detial data band i can set nothing, but it must exist,
  then in Master data band i can show the result of query Detail data with Master data,
  and relation must be one Master by one Detail.
  
  It's mean if i want set several Deatil data,i must desgin several level to query?
  
  Thank you!
  
  i desgin simple report for example, and i send mail to you,
  the mail subject is "MSATER-DETAIL report from jain"
• AlexTZ

  July 2009 edited 1:54AM

  Hello,
  
  If I understood you correctly, you want to have master data band and display in it some values from different datasources. These datasources are connected to the master datasource via SQL parameters.
  
  You need to call Init() method of the detail datasource, in order to refresh it. This can be done in the BeforePrint event of the master data band:
  

      private void Data1_BeforePrint(object sender, EventArgs e)
      {
        Report.GetDataSource("slaveTable").Init();
      }
  
• jain

  July 2009 edited 1:54AM

  HI!!
  
  This method is working,
  so, in the Fast Report NET, i can't use Fast Report 3's method,
  i must use different DATA BANDS or INIT() function?
  
  thank you!
• AlexTZ

  July 2009 edited 1:54AM

  Yes, exactly. In your case you have to use Init().